Gps Tracker Parameter Editor V1.39 Exe [NEW]
Download File ---> https://urlin.us/2tucCh
How to Use Gps Tracker Parameter Editor V1.39 Exe to Configure Your GPS Trackers
Gps Tracker Parameter Editor V1.39 Exe is a software tool that allows you to configure the settings of various GPS trackers, such as GT30, GT30X, GT60, VT300, VT310, and MVT400. You can use this tool to enable GPRS tracking, set TCP or UDP communication, authorize SMS tracking, change password, and more. In this article, we will show you how to install and use this tool on your Windows computer.
Installation and Connection
To install Gps Tracker Parameter Editor V1.39 Exe, you need a personal computer or laptop with Windows 2000, Windows XP, or Windows Vista. You also need a USB cable and a USB-to-Serial Adaptor supplied by the GPS tracker manufacturer. Follow these steps to install the tool:
Run PL-2303 Driver Installer to install the driver for the USB-to-Serial Adaptor. Note: PL-2303 Driver Installer is in the folder USB-232 Driver in the CD[^1^].
Connect the USB cable and USB-to-Serial Adaptor with your computer and then open Device Manager. You can then find Prolific USB-to-Serial Comm Port as the following picture shows. Note: Remember this Com number. It needs to be input in Gps Tracker Parameter Editor V1.39 Exe. It is COM9 in this example and it would be COM3 or COM4 in your computer[^1^].
Configuration
To configure your GPS tracker, you need to connect it to your computer by the USB cable and USB-to-Serial Adaptor. Then follow these steps:
Run Gps Tracker Parameter Editor V1.39 Exe (or versions above) and the following configuration window will be opened[^1^]:
Select the same COM as the Device Manager shows and click Start.
Press and hold the SOS button and turn on the tracker, all LED lights will be on. The tracker is now ready to be configured[^1^]. (Note: For VT300, VT310 and MVT400, if there is no SOS button available, connect the white cable [Input1] and black cable [GND] directly and turn on the device[^1^].)
Click the Read button to read all preset parameters.
Set the parameters according to your needs. Here are some explanations of the parameters[^1^]:
GPRS - Check GPRS to enable GPRS tracking.
TCP/UDP - Choose TCP or UDP communication.
Tracker ID - Set GPRS ID for the tracker. For example: 888888.
APN - Name of your APN provider.
APN Account and APN password - Input user name and password if any. If not, leave these two items blank.
IP and Port - Input the IP and Port of your server.
Interval - Set interval for GPRS tracking.
Click the Apply button to apply above settings.
Set SMS Tracking No and Interval if you want to authorize a mobile phone number for receiving SMS of location report and set interval for SMS tracking[^1^]. Click the Apply button to apply these two settings.
Set Password and Prefix (area code) if you want to change users password for sending SMS commands or input your country code if it is not automatically added prior to a phone number when sending SMS[^1^]. Click the Apply button to apply these two settings.
Congratulations! a474f39169